Nowadays, many new materials have become an indispensable part of people’s life and production, including Japanese Ro reverse osmosis support cloth.
One of the main spinning methods of chemical fibers is called wet spinning for short.
Wet spinning includes the following steps: (1) Preparing the spinning solution; (2) Pressing the original solution out of the spinneret to form a thin stream; (3) Solidifying the thin stream of the original solution into nascent fibers; (4) Rolling the nascent fibers Installation or direct post-processing.
Japanese Ro reverse osmosis support fabric is a type of non-woven fabric, also called pet spunbond filament non-woven fabric or pes spunbond non-woven fabric, also called single-component spunbond non-woven fabric.
Its raw material is 100% polyester chips, which is a non-woven fabric made of countless continuous polyester filaments through spunbonding and hot rolling.
It is generally a water-repellent non-woven fabric, and the water-repellent properties of the non-woven fabric vary depending on the weight.
The larger the weight and the thicker, the better the water repellency.
If there are water droplets on the surface of the non-woven fabric, the water beads will slide directly from the surface.
High temperature resistance.
Because the melting point of polyester is around 260°C, it can maintain the stability of the outer dimensions of the non-woven fabric in environments that require temperature resistance.
It has been widely used in thermal transfer printing, transmission oil filtration, and some composite materials that require high temperature resistance.
Suzhou ptfe filter membrane manufacturer supplies Japanese Ro reverse osmosis support cloth. We have a complete service system, caring before sales, attentiveness during sales, and rest assured after sales! The company can provide samples and arrange sales personnel for door-to-door service if there are other requirements.
You are welcome to come to the company for inspection or enter the store to consult us at any time.
</p
