Composite Fabric,bonded fabric,Lamination Fabric Lamination Fabric News PTFE hydrophilic filter membrane for water resources treatment

PTFE hydrophilic filter membrane for water resources treatment



Membrane separation is a water resource treatment technology with low energy consumption and high filtration efficiency. Among them, nanofiltration membranes have been widely used in sewage treatment, seawater …

Membrane separation is a water resource treatment technology with low energy consumption and high filtration efficiency. Among them, nanofiltration membranes have been widely used in sewage treatment, seawater desalination, food and medicine and other fields due to their advantages of high flux, low operating pressure and good interception performance for divalent ions and small organic molecules.

Bubble point filter material.png

The flow rate is the amount of filtrate passing through the ptfe hydrophilic filter membraneat a specific temperature and pressure per unit time. strong>The total amount. The flow rate is closely related to the surface properties of the filter membrane. Flow rate and flow rate are two important parameters for filter material and design performance. This performance depends on the following aspects:

(1) Viscosity: Viscosity determines how easy it is for a liquid to flow. The higher the viscosity of the liquid (under corresponding temperature and pressure conditions) the lower the flow rate. The higher the pressure required to achieve the same flow rate.

(2) Pressure difference: The pressure difference between the inlet and outlet of filtration. When the filter is fully loaded, the filtration pressure difference increases.

(3) Porosity: refers to the proportion of the volume of all pores on the ptfe hydrophilic filter membrane to the total volume of the filter membrane. Usually filter membranes have 50-90% pore area, and the flow rate is directly related to the porosity of the membrane.

Suzhou New Material Technology Co., Ltd. is a company integrating ptfe air filter membrane, ptfe bubble point membrane, ptfe hydrophilic filter membrane, special A fluorine material film manufacturer that integrates the research, development, production and sales of fluoron membranes and membrane-coated filter materials. The company has advanced PTFE film production lines, lamination and composite production lines, which are at the domestic advanced level. The company’s products are widely used in various fields. Interested parties can enter the store for consultation and purchase!

</p

This article is from the Internet, does not represent Composite Fabric,bonded Fabric,Lamination Fabric position, reproduced please specify the source.https://www.yjtextile.com/archives/4009

Author: clsrich

 
Back to top
Home
Phone
Application
Product
Search