Strong bonding glue can be used to bond materials
Lamination Adhesive, also translated as composite glue, refers to the surface-to-surface bonding between materials such as EVA, SBR, leather, cloth, paper, etc.
Duozheng resin laminating glue
Duozheng resin laminating adhesive has the characteristics of strong initial adhesion, good fluidity, and good oil resistance. It is suitable for the manufacture of shoe uppers, insoles, bags, handbags, wetsuits, knee pads, gloves, etc. or the bonding of their fabric materials.
Widely used in various shoe factories, luggage factories, material composite processing factories, Textile fabric laminating factory, etc.
1
Model: 8301
Features: good initial adhesion, strong oil resistance
Application: Mainly used for the composite of bags, handbags, shoe uppers, insoles, mouse pads and other materials, such as nylon cloth composite EVA, etc.
2
Model: 808F
Features: high heat resistance, good yellowing resistance, moderate drying speed, not easy to knot Leather
Application: Mainly used for lamination of bags, shoe uppers, insoles and other materials
3
Model: 808R
Features: High heat resistance, not easy to burn during high temperature molding
Application: Mainly used for the composite of bags, shoe uppers, insoles and other materials, such as nylon cloth composite EVA, elastic cloth and EVA, Jiaji cloth and EVA composite
4
Model: 808B
Features: strong adhesion, high cost performance
Application: Mainly used for laminating bags and airtight materials
Wet lamination
The wet composite process means that after the adhesive is coated on the surface of the composite substrate, it is composited immediately and then heated and solidified to form a composite material.
When compounding, the adhesive contains solvent or water, and the composite substrate is used The porosity allows solvents and water to be absorbed by the pores and evaporate through them. For this reason, wet lamination is suitable for porous or substrates that can absorb solvents or water. It is not suitable for lamination of plastic films and plastic films, but it is suitable for lamination of plastic films and porous materials.
Notes
In the operation process, the correct selection of laminating glue and the control of temperature and glue amount are very critical! Since the actual production conditions of each processing plant are different, especially “control of temperature and glue amount” and possible problems “for the next production process” (mainly “insufficient viscosity”, “drawing”, etc.), so All manufacturers are kindly requested to conduct comprehensive experiments before use, and then consider selecting appropriate laminating adhesive products for mass production. Our company will sincerely provide professional technical advice and guidance to all users.�.
