Knowledge｜It’s summer, do you still need to wear gloves when riding? Summer is here, and many cyclists feel that wearing gloves is stuffy. In fact, cycling gloves can not only reduce the risk of slippery hands due to sweat, but the thick pads on the gloves can absorb the shock and impulse during riding and reduce hand numbness.
In addition, gloves can also be used to wipe sweat and even provide protection in the event of a crash. Having said so much, in fact, the functions emphasized by different gloves are not necessarily the same, and the secret has a lot to do with the material of the gloves. Buying a good pair of gloves can not only improve the comfort of riding, but also add points to the overall look of the clothing.
Specific functions of gloves
1. Breathability: In order to avoid stuffiness when wearing gloves, the surface material is made of mesh cloth, Lycra cloth and three layers of cloth commonly known as sandwich mesh. A combination of functional composite fabrics, among which Lycra has good stretch elasticity and is the most widely used. Functional composite fabric is composed of an outermost layer of mesh, a middle layer of waterproof and breathable membrane, and an inner layer of bristle cloth. It is water-repellent and cold-proof, and is more commonly used in severe cold areas in the north.
2. Wipe sweat: Made of terry cloth, it is mainly used to wipe away drops of sweat that affect vision rather than wiping the entire face in a large area. Therefore, the terry cloth is generally designed at the thumb to facilitate riding. Or wipe it.
3. Shock absorption: The shock absorption effects of the glove lining are foam, EVA, memory foam, and shock-absorbing gel (Gel) in order. Memory foam can be better because it has a ring-shaped shape. Grip the bike handlebars firmly, slightly less shock-absorbent than shock-absorbing gel, but suitable for road or recreational vehicle gloves riding flat terrain. Off-road vehicles and extreme sports vehicles are more suitable to use shock-absorbing glue to prevent shocks and provide support and protection in the event of slipping.
4. Anti-slip: The material attached to the main body is mostly used in the protruding parts of the hand making fists. In the early days, PVC, which was less environmentally friendly but low-cost, was used. Recently, its use has been banned in developed countries, so it has been extended to the most common PU material, which is more expensive than PVC but is environmentally friendly. In addition, there is silicone with better anti-slip effect. Silicone is more difficult to process and more expensive to produce. It is mostly used in high-end gloves and special-purpose gloves.
5. Main body: Made of microfiber leather, it has strong wear resistance and moderate hand fit. It is the largest part of the palm.
Wearing and maintenance
1. Since bicycle gloves are gloves that fit the hand better, in order to facilitate putting on and taking off, some gloves will have rough anti-slip seams at the bottom of the palm. The piece makes it easy to pull down and close when putting it on. When taking it off, you can use the easy-to-remove strap between your fingers to easily take it off; if there is no easy-to-remove strap, it is recommended to pull on the palm of the hand instead of the fabric on the back of the hand to take off the glove. The fabric on the palm of the hand is more resistant and can keep the glove in place. Will not deform.
2. Washing your gloves wisely will make them more durable. How to wash gloves? The answer is that it is best to wash them by hand. Just soak them in soapy water, rub them, and dry them in a cool place. Do not use hot water, bleach or other strong acid and alkali cleaning methods, and do not dry them in the sun, as this can easily damage the material structure, causing pilling, loosening of the fabric, and deformation of the gloves.
3. If you are too lazy to wash by hand, remember to stick the Velcro to prevent the Velcro from sticking to the fabric and causing the fabric to pill. It is best to put it in a laundry bag before washing it in the washing machine to reduce the deformation of the gloves. possibility.
