Composite Fabric,bonded fabric,Lamination Fabric Lamination Fabric News Why use polytetrafluoroethylene microporous filter membrane for liquid filtration?

Why use polytetrafluoroethylene microporous filter membrane for liquid filtration?



Liquid filtrationPolytetrafluoroethylene microporous filter membrane refers to a microporous filter membrane made of polytetrafluoroethylene (PTFE) material. For liquid filtration applications. It has some spec…

Liquid filtrationPolytetrafluoroethylene microporous filter membrane refers to a microporous filter membrane made of polytetrafluoroethylene (PTFE) material. For liquid filtration applications. It has some special properties that make it widely used in the field of liquid filtration.

air film.png

The following are the characteristics and applications of liquid filtrationpolytetrafluoroethylene microporous membrane:

1. High chemical stability: PTFE has good corrosion resistance and chemical stability against most chemicals and solvents. It can resist the erosion of acid, alkaline and various organic solvents, so it is suitable for processing various liquid samples.

2. Non-adhesion: PTFE has very low surface tension and non-adhesion, making it less susceptible to particles and colloids in the liquid. or the adhesion of sediment. This helps reduce filter membrane clogging, improve filtration efficiency, and extend filter membrane life.

3. Stable pore size distribution: It has a uniform pore size distribution and can provide consistent filtration effect. This is important for applications that require accurate control of filter particle size.

4. High temperature tolerance: Can work in high temperature environments, usually withstanding temperatures up to 260°C. This makes them suitable for high temperature liquid filtration applications.

5. Application fields: Liquid filtration is widely used in food and beverage processing, pharmaceuticals, chemicals, environmental monitoring and other fields. For example, in the food and beverage industry, they are used to remove suspended solids, microorganisms and other impurities to improve product purity and quality.

It is necessary to select the appropriate polytetrafluoroethylene microporous filter membrane type according to the specific filtration requirements, characteristics of the treated liquid and operating conditions. and pore size. Interested parties are welcome to enter the store and contact us.

</p

This article is from the Internet, does not represent Composite Fabric,bonded Fabric,Lamination Fabric position, reproduced please specify the source.https://www.yjtextile.com/archives/3280

Author: clsrich

 
Back to top
Home
Phone
Application
Product
Search