Process of weaving cotton fabrics Composite fabric information

Cotton fabric is composed of warp and weft, so the yarn should be spun before weaving. The production process of warp and weft is different. The specific steps are as follows

(1) Winding: The yarn clearer removes harmful defects on the yarn surface and winds it into a package with large capacity, good shape and quality that meets the requirements. (2) Warping: Integrate a certain number of warp yarns into sheet yarns, and wind them neatly and parallelly on the moving warp beam according to a certain length. (3) Sizing: Combine the warp yarns on several warping beams into one piece, immerse it in slurry, and dry it so that the slurry immerses and covers the yarn to increase the strength and adhesion hairiness of the yarn to adapt to weaving. Production. (4) Direct weft yarn: The yarn spun by the spinning machine is wound on the weft tube: directly used for weaving small products. (5) Indirect weft yarn: The thin yarn is wound into a cheese yarn, and the warp and weft are woven into a bobbin for weaving production. (6) Fixed twist: In order to prevent weft shrinkage defects, the weft yarn is usually hot and wet-twisted, and then used after the twist is stable. (7) Weaving: The process of weaving warp and weft yarns into fabrics of different styles using different looms, different tissues and machine parameters.
AAAVSGREHTRY45