Three layers of cloth
First try Making cloth shoes, cutting paper patterns based on the baby’s shoes. It took a long time to cut the seemingly simple small paper patterns. Haha, I have no choice but to do it myself, so no matter how tired I am, I would rather do it. Because it was my first time, I didn’t know if I could wear it after it was made, so I used all the old cloth, which didn’t look very good. I couldn’t help it, so I picked it up, haha, I couldn’t bear to use the beautiful cloth! After I made it, it looked good when I put it on, but I always regretted it. 
1. This is a ready-made cloth board, used Brush the sheet cloth with a layer of paste, which is mixed with flour paste over the fire. We call it Keban here, with three or two layers of paste.
I used three layers of boards for each sole
2. Fix the paper pattern on a layer of board and cut it out
3. Sew the cut first layer of board to another On a layer of board, cut out one by one
Cut three layers After taking the board, I started to wrap the soles. The upper layer and the middle layer were filled with two layers of cloth. Indent by 2 points. Fill in the layer below.
Sole, the grounding side, wrap it with a layer of cloth, and then fill it with two layers of heart. After wrapping it like this, fill it with filling. When making the paste, beat less, spread it evenly, and make it not too hard
Wrap the other two layers of boards with diagonal strips and then fill them.
Good sole wrapping effect
Then the three layers are stained together. At this time, Apply more paste, otherwise it won’t stick. I didn’t dip it well and had an opening. After dipping, find a warm place and press it with a heavy object. When dry, start to collect the soles. Once the soles are done, start working on the uppers when they are dry.
The effect after taking it well, children can take it more lightly , save yourself some trouble, haha
The sole part is finished.
Dip the three layers of fabric and let it dry. At this time, put the soles on , after the soles are in place and the uppers are dry
Shoes I used three layers of fabric for the surface, it just depends on the thickness you like. Sew the paper pattern onto the fabric and cut it out.
The method is the same as making the sole. After cutting it, put the heel there After the connections are made, the lining is sewn by hand. Edge with diagonal strips. The inside is hand-sewn. The shoelaces are installed separately, which is easier to operate. The ones I have are connected together, and the shoe-like straps are cut a little further back, but it’s fine and can be worn. If you attach a strap, you’ll be worry-free. I did this part because I had to take time, and I didn’t have time to take pictures. The children were always fighting over me, and it was not easy to do some work while fighting.
Then find the middle point, and fix the toe and heel. Start putting on the uppers
