Composite Fabric,bonded fabric,Lamination Fabric Lamination Fabric News Separation effect of MBR sewage treatment membrane

Separation effect of MBR sewage treatment membrane



Due to the high separation effect of the membrane, the separation effect is much better than that of the traditional sedimentation tank. The treated water is extremely clear, with suspended solids and turbidity…

Due to the high separation effect of the membrane, the separation effect is much better than that of the traditional sedimentation tank. The treated water is extremely clear, with suspended solids and turbidity close to zero, and small bacteria and viruses are greatly eliminated. If removed, the effluent water quality is better than the domestic water quality standard (CJ25.1-89) issued by the Ministry of Construction, and can be directly reused as non-potable municipal water. At the same time, MBRsewage treatment membrane separation also intercepts all microorganisms in the bioreactor, allowing the system to maintain a high microbial concentration, which not only improves the efficiency of the reaction device The overall removal efficiency of pollutants ensures good effluent water quality. At the same time, the reactor has good adaptability to various changes in inlet water load (water quality and water quantity), is resistant to impact loads, and can stably obtain good effluent water quality. .

Bubble point filter material.png

PolytetrafluoroethyleneMBRSewage treatment membrane uses PTFE as The raw material is made of special technology, biaxially stretched, and utilizes the special node fibrillarity of polytetrafluoroethylene film, smooth surface, chemical resistance, breathable and impermeable, large air permeability, flame retardant, temperature resistance, strong acid and alkali resistance, etc. , the products made have high filtration efficiency, up to 99.99%, close to zero emissions; low operating resistance, fast filtration speed; long service life and can be reused.

It is a high-tech enterprise focusing on the research and development, production and sales ofMBRsewage treatment membrane , with a factory area of ​​nearly 8,000 square meters, professional production equipment and strong scale, and is a partner of Fortune 500 companies; the products we produce are all produced with imported raw materials, and we have a full set of advanced production equipment and testing instruments, complete pre-sales , in-sales and after-sales service system. If you are interested, please enter the store for consultation.

</p

This article is from the Internet, does not represent Composite Fabric,bonded Fabric,Lamination Fabric position, reproduced please specify the source.https://www.yjtextile.com/archives/5034

Author: clsrich

 
Back to top
Home
Phone
Application
Product
Search