Nowadays, gas turbines, oxygen generating stations, air compressors and vehicle air intake systems have increasingly higher requirements for the filtration efficiency, dust holding capacity and other performance of air filter materials. In order to obtain high performance Relatively excellent filter materials require continuous improvement of the preparation process of filter materials. The existing preparation method of high dust-holding capacity filter materials involves resin coating on the surface of the material and low tightness, which greatly affects the capacity of the high dust-holding capacity filtermaterial The amount of dust causes the dust holding capacity to decrease.
Air purifiers can remove typical indoor air pollutants such as smaller dust and tiny bacteria. The latter two methods are highly operable because they are not restricted by the objective conditions of the external atmosphere. However, the filters used in the above two methods are limited by existing materials, resulting in limited dust holding performance, reducing the service life and time of the vacuum cleaner or air purifier, and increasing the cost of use for residents. Therefore, the development of high dust-holding filter materials and filters has strong practical significance and social value for improving the performance and user experience of air filters.
High dust-holding filter material has excellent breathability, corrosion resistance, aging resistance, temperature resistance and other properties. According to the usage requirements, the pore diameter can be between 0.1-10um, the thickness can be between 2-100um, the porosity can reach 50%–80%, there are up to hundreds of millions of micropores per square centimeter, and the filtration grade can reach H13-U16. It can operate at a continuous operating temperature of 240°C and an instantaneous temperature of 260°C.
The High Dust CapacityFilter Material produced by the manufacturer uses imported raw materials and has a full set of advanced production equipment using advanced The production equipment, advanced clean room and independent composite slitting workshop ensure the production quality of High Dust Capacity Filter Material; it uses imported production and testing instruments to detect the quality of PTFE membrane, and also passes SGS Testing and certification, and ISI testing and certification. Interested parties can enter the store and contact us.
</p
