clsrich

1. The edge twisting principle of the electronic edge twister No matter how the electronic edge twister is divided, the edge twisting principle is the same, the only difference lies in the driving method of the…

The weaving process requires that the fabric must have a corresponding hemming device during weaving. Generally, it is mechanical edge twisting. This article focuses on electronic edge twisting. During the weav…

The time during which the up-and-down hemming heddle is in the same position is called the hemming time. Depending on the characteristics of the weft yarn, the hemming time may be earlier or later. When the wef…

The heald frames of the loom drive the healds to form openings. The heald frames of shuttle looms are mostly made of wood or steel, while the heald frames of shuttleless looms are mostly made of aluminum alloy.…

1. Types of heald frames (1) According to the type of loom: heald frames for air-jet looms; heald frames for water-jet looms; heald frames for rapier looms; heald frames for projectile looms heald frame. (2) Ac…

1. Maintenance of heald frames (1) Heald frames should be handled with care to avoid collisions. (2) The heald frame should be cleaned frequently to remove any debris on the heald frame. (3) After disassembling…

Common heald frames and main technical specifications are shown in Table 5-7. Extended reading:Extended reading:Extended reading:Extended reading:Extended reading:Extended reading:

1. The structure and basic dimensions of the heald frame (Figure 5-1, Figure 5-2) (1) The distance between the heald rods (heald frame and heald distance) H is determined by the distance between the heald ears.…

The draw-in rod is a key part of the heald frame, which connects the healds or steel healds through the draw-in rod. 1. The role of the draw-in rod in the weaving process The draw-in rod is an important part of…