Composite Fabrics Q&A

　　This article briefly introduces the mechanism and finishing process of the finishing agent used for soft finishing, oil-repellent and anti-fouling, shrinkage and sanitary finishing of wool fabrics. 　　1. Overv…

　　In addition to giving cotton fabrics no ironing properties, polypolyhydroxy acid can also improve the flame retardancy of cotton-polyester-cut blankets. The esterification reaction between polypoly hydroxy ac…

　1 Introduction　　Nylon is a hydrophobic fiber, which contains amino and carboxylic groups [1]. It can be dyed with dispersed dyes, acid dyes, and especially weakly acidic dyes. Its dyeing has the characteristic…

　　At the 3rd International Conference on Printing and Dyeing Processing in Kyoto, Dr. Volkmar v. Arnim of ITV Denkendorf of Germany published a special topic on “The Application of Plasma Technology in Dy…

(1)Investigation and research, hold a Zhuge Liang meeting. Please attend the appointment and listen to different opinions. (2)Big reasons can be considered from the aspects of people, equipment, materials, meth…

1. Improper fabric process design and configuration (1) Improper selection of the pen number: After the total number of pens is determined, the layout and compression of the finished product must meet the requi…

When the shuttle is flying in the shuttle, the rolling shuttle and the shuttle will be generated due to improper position of the side support and hanging hedge, the steel pen, the improper arc of the shuttle pl…

The warp and weft yarns of the fabric located at the edge support are rolled and broken by 1 to 2 pieces, forming a yarn body that is easily broken, and is called a side support defect, as shown in 2-2. [I) Cau…

A square eye is called a square eye, as shown in Figure 2-70. It is formed by the fact that the tensions of the upper and lower layers of warp yarns are close to equal, so that in the fabric formation, it canno…