Composite Fabrics Q&A
Composite Fabrics Q&A
Section 5 Models and main technical specifications of heald frames
Common heald frames and main technical specifications are shown in Table 5-7. Extended reading:Extended reading:Extended reading:Extended reading:Extended reading:Extended reading:
Section 3 Structure and Selection of Heald Frames
1. The structure and basic dimensions of the heald frame (Figure 5-1, Figure 5-2) (1) The distance between the heald rods (heald frame and heald distance) H is determined by the distance between the heald ears.…
Section 6 Manufacturers of loom heald frames
Extended reading:Extended reading:Extended reading:Extended reading:Extended reading:Extended reading:
Section 1 The function of the heald rod and the conditions it should meet
The draw-in rod is a key part of the heald frame, which connects the healds or steel healds through the draw-in rod. 1. The role of the draw-in rod in the weaving process The draw-in rod is an important part of…
Section 2 Types and Technical Requirements of Heald Rods
1. Classification of heddle rods (1) Classification according to the cross-sectional shape of the heddle rods: O-shaped; J-shaped; C-shaped (see Figure 6-1). (2) Classification according to the use of heddle ro…
Ring spinning process and top equipment manufacturers
Ring spinning process: Blowing—carding—drawing—roving—spun yarn—winding 1. Blowroom 1. Tasks of the blowroom (also known as blowroom) machine: 1). Opening: 0.1mg (about 16 fibers) …
Section 3 Use of Heald Rods
1. Use of O-shaped heddle threading rods(1) O-shaped heddle threading rods are mainly used for closed heddles or healds. (2) The O-shaped heald rod is used in conjunction with the heald frame. 2. Use of J-shape…
Section 4 Maintenance and Management of Heald Rods
1. Maintenance of the heald rods (1) Handle the heald frames and the heald rods that have been removed from the machine with care, and properly transport them back to the reed room. (2) After starting the machi…
Section 5 Models, Technical Specifications and Manufacturers of Heald Rods
1. Models of heald penetration rods 1. Models of O-shaped heald penetration rods (1) Markings of A-shaped heald penetration rods Example: Suitable for closed O-shaped heddle ear healds, length 1000mm, width 9mm…
Section 5 Models and main technical specifications of steel healds
1. Models of steel sheet healds (1) C shape: Heald lug open type, single row is represented by C, double row is represented by CP; (2) J shape: Heald lug open type, single row It is represented by J, double row…